P0433
Generic (SAE) Basic entry
Heated Catalyst Efficiency Below Threshold
Severity
Medium
Typical repair cost
300 – 2 000 EUR
System
Powertrain
What it means
P0433 is stored when the monitored efficiency of the Heated Catalyst falls below the threshold programmed by the manufacturer, usually measured by comparing sensors before and after the component.
Advertisement728 × 90
Symptoms
- Check engine light on, often with no change in driveability
- Failed emissions inspection
- Slight increase in fuel consumption
- Smell from the exhaust in some cases
Common causes
- Component worn out or poisoned by oil, coolant or fuel additives
- Faulty downstream sensor giving a false efficiency reading
- Exhaust leak before the rear sensor
- Upstream problem (misfire, rich mixture) damaging the component
- Incorrect or low-quality aftermarket part
How to diagnose
- Fix any other stored codes first, especially misfire and fuel trim codes
- Inspect the exhaust for leaks and rattling internals
- Compare live sensor data before and after the component
- Check the component temperature or pressure differential as applicable
- Replace the component only after confirming sensors and engine are healthy
Frequently asked questions
Can I keep driving with P0433?
Usually yes for a short time, but expect reduced performance or higher fuel use. Have it diagnosed within a few days.
Will clearing P0433 fix it?
No. Clearing only erases the stored code; it returns as soon as the monitor runs again unless the cause is repaired.
Related codes
Nearby codes in this group
- P0432Main Catalyst Efficiency Below Threshold (Bank 2)
- P0434Heated Catalyst Temperature Below Threshold
- P0431Warm Up Catalyst Efficiency Below Threshold (Bank 2)
- P0435Catalyst Temperature Sensor
- P0430Catalyst System Efficiency Below Threshold (Bank 2)
- P0436Catalyst Temperature Sensor Range/Performance
- P0429Catalyst Heater Control Circuit
- P0437Catalyst Temperature Sensor Low